Years of research and design have resulted in the development of the Corbeau 3-Inch 5-Point Harness Belts. The Corbeau 3-Inch Harness Belts are SFI 16.1 approved. The rules state that SFI approved harness belts must be replaced every two years. At this rate, spending over $200 for a belt that has to be replaced every two years can get very expensive. At only $99 for our latch and link belts and $149 for our camlock belts, your money is well spent with Corbeau. Our latch and link harness belts feature a quick release lever and use either bolt-in or wrap around mounting points. You simply lift up on the lever to disengage the straps. Our camlock harness belts feature the quick release camlock dial and also use either bolt-in or wrap around mounting points. With the camlock belt the right lap belt remains locked and the other four straps disengage when turning the dial. Both the latch and link and camlock harness belts have light weight pull down length adjusters making it very simple to adjust your harness belts. Three inch harness pads are also recommended for extra padding and to prevent the shoulder straps from rubbing your neck. The part numbers for the 3-Inch 5-Point Harness belt are as follows: 53001B: Black 5-Point Camlock, 53007B: Red 5-Point Camlock, 53009B: Silver 5-Point Camlock, LL53001B: Black 5-Point Latch & Link, LL53007B: Red 5-Point Latch & Link, LL53009B: Silver 5-Point Latch & Link.
If you don't see your model listed here please send us an e-mail at firstname.lastname@example.org or call (855) STOP-101 (855-786-7101). We can usually get what you need within 1-2 business days.
Except as indicated, these products are not approved by Porsche® AG: Use of unapproved parts may alter factory warranty, emissions, aerodynamics, or fuel consumption. PMB Performance is not associated with Porsche Cars North America in any manner. All references to the Porsche name, and the vehicle names are for reference only and do not imply any association with Porsche® AG. Always consult authorized factory manuals when performing repair procedures. "Tech Tips" and "How To" articles on this site are for reference only. By entering this site, you agree to hold PMB Performance free from any liability arising out of the use of any information contained herein.