Don't forget the Speed Bleeders! The Speed Bleeder is a patented bleeder screw with a built-in check valve. It is truly a one-person bleeder screw. Once installed, it becomes a permanent part of the brake system. When it is time to bleed your brakes, you loosen the Speed Bleeder 1/4 turn and pump your brake pedal. When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder. When bubble free fluid is evident you close the Speed Bleeder. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. It generally takes about 5 pumps to purge each caliper or wheel cylinder. That is all there is to bleeding your brakes. If at a later date you need to bleed your brakes, the patented thread sealing system makes it easy to open the bleeder screw to perform the bleeding operation. It is made of quality materials and it is economical.
Except as indicated, these products are not approved by Porsche® AG: Use of unapproved parts may alter factory warranty, emissions, aerodynamics, or fuel consumption. PMB Performance is not associated with Porsche Cars North America in any manner. All references to the Porsche name, and the vehicle names are for reference only and do not imply any association with Porsche® AG. Always consult authorized factory manuals when performing repair procedures. "Tech Tips" and "How To" articles on this site are for reference only. By entering this site, you agree to hold PMB Performance free from any liability arising out of the use of any information contained herein.