Restore your factory ride quality with new rubber bushings for the front of your 914 or 911.
If you're on a budget, this is the best bushing for your primarlily street driven 914. I tend to use the "Pareto principle" these days to determine which bushings I use on my cars:
80% Street 20% Track - The new rubber systems are the ones to go with.
80% Track 20% Street - Use a solid bushing that will afford better suspension geometry for track.
With the advent of new rubber for these cars, this is my first recommendation. There is no mistaking the fact that you're missing 1/4" of rubber when you install a hard bushing on a street car. While the ride is precise you're smooth as silk factory feel is gone. Take it from someone who has "been there, done that"... if your car is primarily street driven, these are the bushings for you.
Except as indicated, these products are not approved by Porsche® AG: Use of unapproved parts may alter factory warranty, emissions, aerodynamics, or fuel consumption. PMB Performance is not associated with Porsche Cars North America in any manner. All references to the Porsche name, and the vehicle names are for reference only and do not imply any association with Porsche® AG. Always consult authorized factory manuals when performing repair procedures. "Tech Tips" and "How To" articles on this site are for reference only. By entering this site, you agree to hold PMB Performance free from any liability arising out of the use of any information contained herein.